SLIMLINE TEMPERATURE TRANSMITTER
Reotemp’s Slimline Temperature Transmitter is a compact, rugged transmitter for applications where space is limited. The fully sealed design keeps out any water, liquids or moisture. It’s great for applications where the transmitter is exposed to the elements or equipment is washed down. Our thick-walled 316SS construction makes this transmitter shock and vibration resistant, increasing product longevity.
- Minimal Installation Space Required
- Rugged, Vibration & Impact Resistant Transmitters
- Hermetically Sealed (IP67)
- All-Welded 316SS Construction
- 4-20mA Linearized Two Wire Output
- Wide Temperature Range with High Accuracy
- A Variety of Process Connections and Electrical Terminations
Sensor Specifications |
|
| Environmental Conditions | |
| Maximum Process Temperature | -328/400°F |
| Common Specifications | |
| Wire Types | Teflon insulated 24 AWG stranded, PVC insulated 24 AWG Stranded, or Teflon insulated 24 AWG Stranded with Aluminum Mylar Shield and Drain Wire |
| Wetted Material | 316 Stainless Steel |
| Housing Material | 316 Stainless Steel |
| RTD Accuracy | Class A = ± (0.15 + 0.002|t|)°C [-30/200°C] 1/10 B = ± (0.03 + 0.0005|t|)°C [ 0/50°C] Outside of State Ranges = ± (0.3 + 0.005|t|)°C [ -200/200°C] |
| Input Specifications | |
| RTD Type | Pt100, Ni100 |
| Observed Authority Requirements | |
| RoHS | 2011/65/EU |
Transmitter Specifications |
|
| Environmental Conditions | |
| Ambient Temperature | -40/185°F |
| Relative humidity | <95% relative humidity (non-condensing) |
| Common Specifications | |
| Supply Voltage | 8.0 to 35 VDC |
| Internal Power Dissipation | 25 mW to 0.8 W |
| Response Time (Programmable) | 0.33 to 60s |
| Voltage Drop | 8.0 VDC |
| Warm-up Time | 5 min. |
| Effect of Supply Voltage Change | < 0.005% of Span / VDC |
| Accuracy | Better than 0.1% of selected range + RTD Accuracy |
| EMC Immunity Influence | <±0.5% of Span |
| Output Specifications | |
| Updating Time | 135 ms |
| Signal Range | 4-20 mA |
| Min. Signal Range | 16 mA |
| Load (@ current output) | ≤ (Vsupply – 8) / 0.023 [Ω] |
| Load Stability | ≤ 0.01% of span /100Ω |
| Sensor Error Indication | Programmable 3.5 to 23 mA |
| NAMUR NE43 Upscale/Downscale | 23 mA / 3.5 mA |
| Of Span | = of the presently selected range |
| Input Specifications | |
| Cable Resistance Per Wire | 10 Ω (max.) |
| Sensor Current | > 0.2 mA, < 0.4 mA |
| Effect of Sensor Cable Resistance (3-wire) | < 0.002 Ω/Ω |
| Sensor Error Detection | Yes |
| Max. Offset | 50% of selected max. value |