G1
SINGLE VALVE BLOCK & BLEED
REOTEMP’s G1 single valve block and bleed allows users to isolate pressure to their instrument, bleed off excess process, and remove an instrument without disturbing or shutting down the system. A variety of options are available to suit just about every application.
- 0.090” Bleed Hole Controlled by a 1/4”-20 UNF-2A Bleed Screw
- FKM O-ring Seal and PTFE Back-up Ring Below the Stem Threads to Protect from Corrosion and Galling; Soft Seat Comes Standard with Delrin Seat
- PTFE or Grafoil Packing Optional
- All Stems are 316SS
- Vinyl Dust Cap for Bonnet & Stem (Non-packing)
- Rolled Threads for Strength, Durability, and Ease of Use
- All Valves are Helium Leak Tested for Optimal Performance
Body Material: 316 Stainless Steel, Zinc-nickel Plated Carbon Steel
Pressure Rating: Hard Seat – 10,000 psi at 200°F, Soft Seat – 6,000 psi at 200°F.
Temperature Rating: Standard up to 200°F; Available up to 1,000°F.
Orifice: 0.187”
Flow: Hard Seat CV: 0.44, Soft Seat CV: 0.76
Connections: 1/4” or 1/2”
Pressure Rating: Hard Seat – 10,000 psi at 200°F, Soft Seat – 6,000 psi at 200°F.
Temperature Rating: Standard up to 200°F; Available up to 1,000°F.
Orifice: 0.187”
Flow: Hard Seat CV: 0.44, Soft Seat CV: 0.76
Connections: 1/4” or 1/2”