Back Connect Bimetal Thermometer
Back Connect Bimetal Thermometer
Back Connect Bimetal Thermometer
Custom Logo
Fillable
Reotemp’s Bimetal Thermometers are reliable and accurate temperature sensors requiring no electricity or wiring. This line of thermometers is designed for OEM applications in a variety of industrial applications where a more economical option is needed. Back Connect Thermometers are ideal for local, eye-level temperature readings. They can be recalibrated with a turn of the calibration screw on the back of the dial. A variety of options are available for your specific process needs.
- OEM Logo Dials/Custom Dials
- All Stainless Steel Construction
- Hermetically Sealed
- Silicone Fillable for Vibration
- Standard and Custom Stem Lengths
- Standard External Reset for Calibration
- One Year Warranty
ACCURACY: ± 1.5% Full Scale
DIAL SIZE: 3”, 4” or 5”
DIAL MATERIAL: White background with black marks. Anodized Aluminum background available.
STEM LENGTH: 2” to 36”
STEM DIAMETER: 1/4”
HEAD, BEZEL, MOUNTING BUSHING, STEMS: 304SS
OPERATING CONDITIONS: Head temperature should not exceed 200°F (150°F if silicone filled). Stem should not be exposed to continuous temperatures exceeding 50% over-range or 800°F(550°F if silicone filled).
TEMPERATURE RANGES: See next page for complete list of ranges.
CASE RATING: IP65, Hermetically Sealed
LENS: Glass (std), Acrylic, Polycarbonate, Tempered Glass, Laminated Safety Glass
IMMERSION: Minimum 2” in liquid, and 4” in gas for most ranges. Certain ranges require up to 4” in liquids & 5” in gas.
MOUNTING CONNECTION: 1/2” NPT (std), 1/2” BSPT, 1/4” NPT, 1/4” BSPP
TEMPERATURE SENSING AREA: Last 2” to 4” of the stem
NOTE: Thermowells should be used whenever the stem or bulb would be exposed to pressure, corrosion, velocity, abrasion or shear forces. Thermowells also make it possible to remove the thermometer without losing pressure or the contents of the process.
DIAL SIZE: 3”, 4” or 5”
DIAL MATERIAL: White background with black marks. Anodized Aluminum background available.
STEM LENGTH: 2” to 36”
STEM DIAMETER: 1/4”
HEAD, BEZEL, MOUNTING BUSHING, STEMS: 304SS
OPERATING CONDITIONS: Head temperature should not exceed 200°F (150°F if silicone filled). Stem should not be exposed to continuous temperatures exceeding 50% over-range or 800°F(550°F if silicone filled).
TEMPERATURE RANGES: See next page for complete list of ranges.
CASE RATING: IP65, Hermetically Sealed
LENS: Glass (std), Acrylic, Polycarbonate, Tempered Glass, Laminated Safety Glass
IMMERSION: Minimum 2” in liquid, and 4” in gas for most ranges. Certain ranges require up to 4” in liquids & 5” in gas.
MOUNTING CONNECTION: 1/2” NPT (std), 1/2” BSPT, 1/4” NPT, 1/4” BSPP
TEMPERATURE SENSING AREA: Last 2” to 4” of the stem
NOTE: Thermowells should be used whenever the stem or bulb would be exposed to pressure, corrosion, velocity, abrasion or shear forces. Thermowells also make it possible to remove the thermometer without losing pressure or the contents of the process.
Download Install Instructions: