Request a Quote


Reotemp’s Slimline Temperature Transmitter is a compact, rugged transmitter for applications where space is limited. The fully sealed design keeps out any water, liquids or moisture. It’s great for applications where the transmitter is exposed to the elements or equipment is washed down. Our thick-walled 316SS construction makes this transmitter shock and vibration resistant, increasing product longevity.

  • Minimal Installation Space Required
  • Rugged, Vibration & Impact Resistant Transmitters
  • Hermetically Sealed (IP67)
  • All-Welded 316SS Construction
  • 4-20mA Linearized Two Wire Output
  • Wide Temperature Range with High Accuracy
  • A Variety of Process Connections and Electrical Terminations

Sensor Specifications

Environmental Conditions
Maximum Process Temperature -328/400°F
Common Specifications
Wire Types Teflon insulated 24 AWG stranded, PVC insulated 24 AWG Stranded, or Teflon insulated 24 AWG Stranded with Aluminum Mylar Shield and Drain Wire
Wetted Material 316 Stainless Steel
Housing Material 316 Stainless Steel
RTD Accuracy Class A = ± (0.15 + 0.002|t|)°C [-30/200°C] 1/10 B = ± (0.03 + 0.0005|t|)°C [ 0/50°C] Outside of State Ranges = ± (0.3 + 0.005|t|)°C [ -200/200°C]
Input Specifications
RTD Type Pt100, Ni100
Observed Authority Requirements
RoHS 2011/65/EU

Transmitter Specifications

Environmental Conditions
Ambient Temperature -40/185°F
Relative humidity <95% relative humidity (non-condensing)
Common Specifications
Supply Voltage 8.0 to 35 VDC
Internal Power Dissipation 25 mW to 0.8 W
Response Time (Programmable) 0.33 to 60s
Voltage Drop 8.0 VDC
Warm-up Time 5 min.
Effect of Supply Voltage Change < 0.005% of Span / VDC
Accuracy Better than 0.1% of selected range + RTD Accuracy
EMC Immunity Influence <±0.5% of Span
Output Specifications
Updating Time 135 ms
Signal Range 4-20 mA
Min. Signal Range 16 mA
Load (@ current output) ≤ (Vsupply – 8) / 0.023 [Ω]
Load Stability ≤ 0.01% of span /100Ω
Sensor Error Indication Programmable 3.5 to 23 mA
NAMUR NE43 Upscale/Downscale 23 mA / 3.5 mA
Of Span = of the presently selected range
Input Specifications
Cable Resistance Per Wire 10 Ω (max.)
Sensor Current > 0.2 mA, < 0.4 mA
Effect of Sensor Cable Resistance (3-wire) < 0.002 Ω/Ω
Sensor Error Detection Yes
Max. Offset 50% of selected max. value