REOCLICK™ SANITARY RTD

Reotemp’s patented ReoClick™ makes disconnecting and reconnecting your temperature sensor a snap, literally. With the click of a button, your temperature sensor is released from the female tri-clamp allowing it to be quickly placed into a temperature bath for a calibration check and then securely snapped back into place, in a matter of seconds. The ReoClick replaceable element design also allows the sensor to be easily replaced with minimal downtime.

3-A Approved Wetted Surfaces (32 Ra max.) with 3-A Certificate Provided
Connect/disconnect Sensor with a Click of a Button for Easy Calibration
Fully Sealed for Washdown (IP67)
Sealed Spring Loaded Sensor can be Placed Directly into Calibration Bath
Callendar-Van Dusen Coefficients Available for Optimized Sensor Accuracy (Hi-Accuracy™ Curve Plot Option)

Specifications

Accuracy	Class A = ± (0.15 + 0.002\|t\|)°C [-30/200°C] 1/10 B = ± (0.03 + 0.0005\|t\|)°C [ 0/50°C] Outside of State Ranges = ± (0.3 + 0.005\|t\|)°C [ -200/200°C]
RTD	100 ohm Pt., 0.00385 Ω/Ω°C, 3-wire or 4-wire
Temperature Range	-328°F/400°F
Process Connection	Tri-Clamp: 1.5″, 2″, 2.5″, 3″, 4″ or 3/4″
Wetted Finish	Ra 32 Max. / Ra 20 Max.(Optional), Electropolish (Optional)
Stem Length	2” to 36” std lengths; custom lengths available.
Straight Stem Diameters	1/4”, 3/8”, 3/16”
Reduced Stem Diameters	3/8” reduced to 3/16” tip, 1/2” reduced to 1/4” tip
Wire Type	Teflon insulated 24 AWG stranded, PVC insulated 24 AWG Stranded, or Teflon insulated 24 AWG Stranded with Aluminum Mylar Shield and Drain Wire