THREADED FLUSH FACE SEALS
Reotemp’s Threaded Flush Face Seals are ideal for high and medium pressure applications where process media clogging is a concern. The diaphragm is welded onto the end of the threads allowing for continuous flow of process media across the diaphragm and preventing any build-up of solids. Selection of process connection will greatly impact accuracy and temperature sensitivity.
Body: 316SS, Hast C-276
Diaphragm: 316SS, Hast C-276
Process Temperature Limits
Ambient Temperature Limits
Determined by the Pressure Instrument
Minimum Recommended Span
|Male Process Thread NPT||1/2”||3/4”||1”||1.5”|
|2.5” & 3.5” Gauges||60 psi||30 psi||15 psi||15 psi|
|4”, 4.5”, & 6” Gauges||n/a||n/a||100 psi||30 psi|
|Transmitter (Gauge Pressure)||60 psi*||15 psi||10 psi||5 psi|
|Transmitter (Differential Pressure)||n/a||n/a||n/a||n/a|
Maximum Working Pressure
Determined by the seal threads.