Remote Seal Assembly to Smart Transmitters
REOTEMP specializes in the unique craft of assembling diaphragm seals to field transmitters for the purpose of measuring pressure, differential pressure, level, and flow. As a trusted supplier to many of the world’s leading transmitter manufacturers, REOTEMP can assemble a diaphragm seal system to virtually any make or model transmitter. Every transmitter mount includes the features below to ensure superior performance and durability for every assembly. REOTEMP also offers repair, refurbishment or replacement of used transmitters with remote seals.
Standard Features on All Reotemp Assemblies
Smart Transmitter Attachment
Differential Pressure Assemblies
Balanced System
A complete assembly with one part number that includes two diaphragm seals, two capillaries, two fills, and one complete assembly calibration certificate.
| -RR | Identical system on HP and LP Sides, capillary exit through process connections. Capillary mounts only. |
| System Type | Balanced |
| -RA | Identical system on HP and LP sides, capillary exit through face of cover flange. Capillary mounts only. |
| System Type | Balanced |
Unbalanced DP System
Where seal, mount, capillary, or fill is not identical. A complete assembly includes one diaphragm seal on the HP side AND one diaphragm seal on the LP side.
| Side | High Pressure Side |
| -RH | Mount via Process Connections |
| System Type | Unbalanced Dp System |
| Side | Low Pressure Side |
| -RL | Mount via Process Connections |
| System Type | Unbalanced Dp System |
| Side | High Pressure Side |
| -RB | Mount via Face of Cover Flange |
| System Type | Unbalanced Dp System |
| Side | Low Pressure Side |
| -RC | Mount via Face of Cover Flange |
| System Type | Unbalanced Dp System |
Example:
W735WR23SSS-KDWD-AS-RB
W735WR23SSS-KB15-AS-RL
Gauge Pressure Assembly
In Line Pressure Transmitter
| -R1 | Mount to In-Line Gauge Pressure Transmitter. Direct or remote mount. |
| -R4 | Horizontal Mount (Tank Mount) to In-Line Gauge Pressure Transmitter. Direct mount only. |
Traditional Mount for Gauge Pressure
Seal mount on one side only, other side is vented.
| -R2 | Instrument mount through process connections, HP Side. Use “R3” if mounting to LP side |
| -R8 | Instrument mount through face of cover flange, HP Side. Use “R9” if mounting to LP Side |
Example: W9FFWR415-DWD-AS-R8